Monday, June 3, 2019

May 27th, 2019 new questions

Here are some of the new questions in the exam May 27th, 2019

1) what is the outcome of “sh ip sla statistics”
2) how will you retrieve information from Netflow
A)GUI
B)CLI
C)Server
D) Collector
E)XXX
F)XXX
3) what routes will be redistributed on below config
router rip1
default metric 1
redistribute eigrp 100
distribute-list 1 out eigrp 100
Reference

 got around 7 new questions, if u studied from this site, u can manage those new questions or best guess would work.
NO NEED to worry because those question are not that much bad ones.
i have been visiting this site more than six month.
In the exam i got spare time around 40 minutes. i was rushing even the ospf evaluation which was my first question i couldn’t focus too much.
Lab- ( contextual help is available & short command – tab is working – NO copy running-config startup-config working)
PBR case 2 (router2 have one serial 0/0/0 and fastethernet ). i use show route-map & sh access-list to verify the packet hit.
ospf/eigrp redistribution – > i use the traceroute 172.16.1.100 to verify the optimum path via R3 it works. But telnet 172.16.1.100 didn’t work for me ( can’t remember – sorry guys )
ospf evaluation -> Q2 about R3’s serial link apparently one had point-to-point one side had non-broadcast / some with different timers !! like i said earlier i couldn’t focus panicking since this was my first question thinking i won’t have time. so take u time please.
bgp maximum path was my last question so for fun of it ( best guess – probably the right one ) i selected the maximum path as 1 b’coz by default load balance it use only one path. there was no option to select 8.( options are 1. 4. 6.)
To adjust mtu – there was option to select two answers ip tcp adjust-mss / may be — something like this tunnel path-mtu-discovery and ip bandwidth 56344 . So please visit the cisco site for more details.
what command u need at HUB in order to redirect work.
1. ip nhrp redirect ( this is correct )
2. ip nhrp shortcut ( i selected this b’coz others not the best ones )
3. ip ngrp map
4. ip redirect.
study the all DnD from the site and stateful nat 64!
ipv6 bandwidth-percent eigrp 55 80 command was the correct one! because other values are not correct parameter for example AS different location or misplaced so please study the this command very well.

Valid range for BGP private ASNs?
A. 64512-65535
B. 1-64000
C. 64512-65534
Answer: A